Model #10656872600 KENMORE Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Fingers on Ice Maker have not rotated to dump ice

A:

Good afternoon... I can fully understand your concern regarding this issue. I did locate a link that will discuss this situation in greater detail. Though this link discusses a different model number, the mechanics are likely going to be very similar. Keep in mind that an expert will be responding within the next two business days if not sooner and will likely offer you more information and instruction. I hope this link will help guide you as to what might be wrong with your ice maker and have a nice day

Read More
Henry -
February 07, 2013
A:

Hi,

Thanks for contacting ManageMyLife. I understand how frustrating it is having trouble with your refrigerator not working. We are here to help.

When the refrigerator is plugged into the wall and the freezer door is opened, do the LED lights blink twice?  The 2 blinks will confirm the operation of the sensor boards.  The rest of the thing you will be able to do will be the measure live voltage.  You will need to use a multimeter and after unplugging the refrigerator from the wall you will need to loosen the icemaker from the bracket it is sitting on and pivot the left side of the icemaker around to get the module cover off.  This exposes the test points you must use the test the icemaker.  Leave the icemaker plugged into the wiring harness.  LEAVE THE WATER TO THE REFRIGERATOR TURNED OFF.   Tape the freezer door switch in using tape.  Balance the icemaker on the bracket and reconnect the refrigerator to the wall outlet and begin the voltage checks.   The first check I would make is the L to N check, this confirms voltage to the icemaker.  Use a jumper, like shown in the picture, to jump T to H and see if the ejector arms start to turn.  Follow the directions and if you need to replace the thermostat, check the mold out and make sure it is not becoming worn in the molds.  Here is a link to the icemaker.    

NOTE:

  Always unplug or de-energize electrical equipment before removing covers or attempting service.

 

Be careful and wear appropriate hand protection when working around sharp metal parts.

NOTE:  Live voltage checks are dangerous, and possibly deadly. Exercise caution at all times. If you are not comfortable working with live electricity I suggest you call an Sears Home Services technician.

 

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.

Bill

Read More
Bill__W -
Sears Technician
February 07, 2013
See more answers

Top Parts