Model #10656596500 KENMORE Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts, Optional Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How to change supply line to filter 10656596500 Kenmore Refrigerator

Q:

My icemaker stopped working 10656596500 Kenmore Refrigerator

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your refrigerator. Upon researching model 10656596500; make sure the icemaker arm is in the on position. The center wall being hot has to do with the condenser. Check for lint under the unit. This can restrict air flow and cause heat to build up. The center wall would then act like a heat sink. Check the condenser fan. It should be running in intervals. The fan may have burned out and not producing air flow.

Thank you for choosing Sears Parts Direct. We appreciate your business. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
August 04, 2015
Q:

Why won't the icemaker work?

A:

There are some test terminals on this icemaker module that can help determine, what's causing the problem. To access the module, pull the front cover off of the icemaker. You will now see the module and the test terminals will be marked (I'm sending you a picture). Use a well insulated jumper and place it between the L-V terminals. Be careful this is a hot (live) check. With the jumper in place, water should now flow to the icemaker. If water does flow, the icemaker # 4317943 will need to be replaced. If no water flows, some voltage checks will need to be made. The icemaker may not be getting any voltage to it. A volt/ohm meter will be needed or a technician, to make these checks. If you need more assistance, you can resubmit your question with more details.

Read More
Scott D -
Sears Technician
October 14, 2009
A:

DOES THE ENTIRE ICEMAKER NEED TO BE REPLACED OR JUST THE MODULE?

Read More
NED -
July 30, 2015
See more answers

Top Parts