Model #10656564400 KENMORE Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts, Parts Not Illustrated
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Is there a Recall notice on refrigerator #106.56564400?

A:

I'm sorry to hear that you are having some problems with your refrigerator.  Your expert will research your question and respond within two business days but usually sooner.

Read More
Yadira B -
August 07, 2013
A:

Thank you for your question. I understand your concern about the customers request. No, there is no recall on this refrigerator. Sometimes, after the filter has been in the unit for awile it can get stuck and be hard to pull out but this is normal with many models. The o rings (seals) can get dry and create this problem. I hope this will help you.

Read More
Scott D -
Sears Technician
August 08, 2013
See more answers
Q:

Why is ice maker harvesting randomly?

A:

Ice maker that is not working properly can be frustrating. I have done some research on the Manage My Life website and have located several links that you may find helpful towards your issue. While you are waiting for a detailed reply from an expert I have provided the links below. Hope this helps!

Read More
Priscilla V -
April 26, 2012
A:

Thank you for submitting your question and I will be happy to assist you. Based off of your description it sounds like the freezer is not getting cold enough or the defrost cycle is not working properly. If the unit is not getting cold enough it will not allow the ice to form due to improper temperatures. If the freezer is not defrosting properly, then its defrosting for too long and it won't allow the ice maker to work properly either. Meat will freezer at 20 degrees but that's not the proper temperature for the ice maker thermostat to open and close to make ice. I recommend getting a thermometer to see what the inside temperature is. If the degrees read warm then turn the turn the temperature up. If the temperature is okay, then I recommend cleaning the coils from any dust or debris to see if it will change the temperature. If all test okay, then you may have an issue with the defrost timer and I recommend scheduling for service. You can schedule for service online with our Sears Home Services team. I hope this information assists you. Thank you for choosing Manage My Life.

Read More
Tykara -
Sears Technician
April 26, 2012
See more answers
Q:

Ice Maker Arm Not Moving

A:

I understand that your ice maker arm is not moving. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question. Have a great day!

Read More
Alina F. -
April 03, 2012
A:

Thank you for your question. I know it can be disappointing when the icemaker stops working. The icemaker in this model does not need the bail arm and it might be causing the problem. I suggest taking the bail arm off of the icemaker and see if it starts working again. The arm can get stuck in this IDI type icemaker system. It will pull out of the front module. If it still won't cycle, check the temperature in the freezer. If it's not cold enough (below 12 degrees) the icemaker may not cycle. To check the temperature, place a thermometer between some packages. Air temperature is not a good check. If this check is ok also, the icemaker # 2198597 will probably need to be replaced. I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
April 04, 2012
A:

Thank you for the response Scott. Interesting, but it doesn't seem like the ice will come out of the mold without the bail arm pushing the ice. I've attached the ice maker diagram from Sears. Let me know what you think. Thank you.

Read More
Ron -
April 04, 2012
A:

Ron, I'm sorry I misunderstood what arm you were referring to. The arm that pushes the ice out is the ejector (# 23 in the picture) and you are correct, the ice will not come out unless the ejector pushes them out. If the ejector is turning but not pushing the ice out, the most likely reason will be a defective mold heater. If the mold heater does not heat the mold, the ice will not break loose and allow the ejector to push them out. In this case, the icemaker # 2198597 will need to be replaced. It�s available at the link listed below. I hope this will help you. If you would like more assistance, I will be glad to assist you further.

Read More
Scott D -
Sears Technician
April 04, 2012
See more answers

Top Parts