Model #10656249400 KENMORE Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts, Parts Not Illustrated
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

I have a Kenmore model 10656249400 refrigerator. The icemaker does not work. 10656249400 Kenmore Refrigerator, sxs

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Natasha12 -
Sears Technician
January 14, 2014
Q:

My Kenmore icemaker is leaking on refill.

A:

In some top mount units the water will splash out of the fill tube when the icemaker fills. There is a fix for this problem. There is an extension # 2203024 that will slide over the existing tube. The back panel in the freezer will need to be removed, which will require removing everything in the freezer. I'm sending you a picture with instructions to install it. It's available at SearsPartsDirect . If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services . If you need more assistance, please resubmit your question, with additional details and please include a complete model number.

Safety Notice: Be sure to disconnect the appliance before performing any troubleshooting procedures. If you are not comfortable with doing any voltage checks or repairs that might be recommended, please contact a local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Scott D -
Sears Technician
April 20, 2010
A:

I need install instructions to replace my new icemaker from my Kenmore model # 106.56249400. Thank you

Read More
Dawn -
March 25, 2011
See more answers
Q:

Why won’t my Kenmore refrigerator model 106.56249400 icemaker work?

A:

When you jumped T to H did you hold the flapper door of the emitter module closed? I have included a set of diagnostics that are more easily understood (see images below), try the diagnostics again using these. Make sure you follow them closely. I highly recommend calling a service professional to diagnose and repair your appliance.

In most cases it is not cost effective to replace parts of this icemaker; the entire icemaker should be replaced if needed.

Read More
Landell -
Sears Technician
February 24, 2010

Top Parts