Model #10656244400 KENMORE Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts, Parts Not Illustrated
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How to defrost a Kenmore refrigerator? 106.56244400

A:

Thank you for choosing sears I would be happy to help you with your refrigerator. Upon researching model106.56244400 ; I have posted a link below of instructions on how to manually defrost a refrigerator.

I trust this information will help you, have a great day.

                             

Read More
CarlosZ -
Sears Technician
January 27, 2015
Q:

No water is coming from the dispenser and the ice machine is not working. 10656244400

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is trouble with the ice maker.
 
Glad to help out.   Im  looking at your Kenmore Refrigerator model number 10656244400.
 
When  you don't have water coming through, you don't have water in the dispensor or the ice, or both at the same time, then you need to look at the water valve first at the back of the refrigerator.   Sounds like the valves have closed.
 
 
 
INSTRUCTIONS TO CHECK WATER VALVE:
 
1.  Pull the refrigerator out from the wall to where you have room to work on the back of it.   Unplug the refrigerator also.   
 
2.   Look for the water solenoid.  It will have the main water line coming from the bottom and one or two lines from the top.  Remove the solenoid with the screws that hold it to the refrigerator, then unplug the plug that corresponds with the icemaker water line.
 
3.  Make a hot test-cord from any 110-volt electrical cord. Using crimping pliers to cust the end of the cord, and skin the two wires back.  Attach 2 alligator clips to the wire ends.
 
4.  Clamp the 2 alligator clips onto the 2 bare terminals of the solenoid.  Place a bowl on the floor beneath the solenoid so that the top is pointing towards the bowl.  Plug the hot-test cord into an outlet, but be very careful --the current will be flowing into the solenoid through the aligator clips.  Don't touch the clips or the terminals on the solenoid.  If the solenoid shoots water into the bowl, it is good.  If no water comes out, then replace the solenoid.
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs. Thank you for choosing Sears and using our SearsPartsDirect.com.
 
 

Read More
Larry L -
Sears Technician
March 19, 2014
Q:

Ice Dispenser motor not working. 10656244400 Kenmore Refrigerator, sxs

A:

Thank you for your question. I know it can be disappointing when the ice dispenser stops working. A good check will be to press the lever in slowly and listen for a clicking sound. If you do not hear this sound, it will indicate that either the switch has failed or the actuator is not making contact with the switch. In this case, you can remove the front cover and see what is taking place with the switch. I'm attaching a picture with instructions to remove the cover. Be sure to disconnect the power first. If you do hear this sound, then the problem could be with the auger motor itself or a voltage problem to the motor. To make this check you will need a meter that can read dc voltage and feel confident that you can safely make a voltage check. If you would like more assistance, reply to this thread and I will be glad to assist you further. If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services. I hope this will help you.

Read More
Scott D -
Sears Technician
September 24, 2013
A:

Scott thanks for the response! The switch was not clicking so I took the cover off and found that the two pins that hold it to the surrounding plastic had broken off. When I manually tripped the switch the motor started working and ice came out. I will try to find the plastic part it mounts too. Thanks again!

Read More
Mike -
September 24, 2013
A:

Mike, I'm glad you found the problem. The plastic bracket the switch mounts to is # 2180226. It's available at Kenmore refrigerator parts . I hope this will help you. Thank you for using Manage My Life.

Read More
Scott D -
Sears Technician
September 25, 2013
See more answers

Top Parts