Model #10655642500 KENMORE Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts - Optional Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Size of Kenmore refrigerator model 106.55642500 106.55642500

A:

Thanks for using SearsPartsDirect.com and for being a valued member.

Based upon our records for model 106.55642500, we show it featuring 25 cu/ft. of capacity. 

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business.

Read More
Jeff Wallace Sr -
Sears Technician
October 06, 2014
Q:

Water on Floor/hear it running continuosly

A:

If the leak stopped when the water supply was turned off then the problem is most likely not a defrost drain problem.  I would suggest you start by removing the rear cover where the compressor and water valve are located.  I suspect the leak is from the water valve or the filter.  The front grill can also be removed to get a better look.   The image below may be helpful to you. 

Read More
Fred M -
Sears Technician
November 11, 2013
Q:

ICE DISPENSER

A:

I am sorry that you are having some difficulties with your ice maker and I will be happy to help. I did some research and I was able to find a link that will provide you with some good information. I hope this helps with your research while you wait for your expert response.

Read More
Joseph P. -
January 17, 2013
A:

Thank you for your question. I know it can be disappointing when the icemaker stops working. This icemaker has some test terminals on the module that may help determine what the problem is. To access the terminals, pull the front cover off of the icemaker. The terminals will be marked (see picture) and using a well insulated jumper, place it between the L - V terminals. Be careful this is a hot (live) check. With the jumper in place, water should flow to the icemaker. If water does flow, the icemaker # 4317943 will need to be replaced. If no water flows but you can hear a humming noise, the water valve # 4389177 will need to be replaced. If nothing at all happens, some voltage checks will need to be made. A technician may be needed to make these checks. I'm listing a site you can access, to have a tech come out. Here is a link for the website: Sears Home Services . If you would like more assistance, reply to this thread and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
January 19, 2013
See more answers

Top Parts