Model #10655606400 KENMORE ELITE Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts, Optional Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Ice chute 10655606400 Kenmore Elite Refrigerator

Q:

Kenmore (106.55606400) Ice Maker not working.

A:

I understand that your Kenmore ice maker is not working. I have taken some time to research your question here on the Manage My Life website and I noticed that someone else had asked a similar question with a posted response from an expert. I attached the link below if you are interested in viewing. I hope the link that I provided is helpful. Have a great day.

Read More
Alina F. -
June 18, 2011
A:

Your refrigerator has two infra-red boards that turn the icemaker on and off. I am sending you some images showing how to test the optics in the refrigerator. I suspect the optic boards are what turned the icemaker off.

If you have more questions, reply on this thread and I will be glad to help.

Read More
Jimmy K -
Sears Technician
June 20, 2011
A:

I understand this was posted in 2011 but is it possible to re-send those diagrams? My ice maker just did the same thing and I am researching the issue. Thank you, Kevin

Read More
Kevin -
June 18, 2015
See more answers
Q:

Can I DIY replace water line? 106.55606400

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you. It is fairly easy to replace.

 Basically, the line runs from the dispenser down through the door.  You will need to remove the dispenser cover and the toe grill.  Start by disconnecting power to the refrigerator and shutting off the water. Have a towel handy for drips. Use a flat bladed screwdriver to lift the dispenser cover from the bottom. It should pop out. You will need the water fitting assembly with water tube. It comes as one part, #2304317. Remove the toe grill, and disconnect the water tube at the bottom of the door. Next, you will need to remove the door bottom hinge to access the tubing.  The dispenser will also need to be removed to release the tubing. Tie a long string to the tube at the bottom of the door. The tube can be pulled through the door from the top.  The new tubing can be attached to the string to pull back down through the door to the bottom. Reconnect at dispenser and at bottom of door. Turn on water to check for leaks. Turn on power and verify dispenser works.

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
November 17, 2014

Top Parts