Model #10654789803 KENMORE ELITE Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Optional Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers

Q:

My ice maker is putting too much water in the tray 10654789803 Kenmore Elite Refrigerator

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your icemaker and I do understand your frustration. Glad to help out. I'm looking at your model number 10654789803 and here is a link that will help troubleshoot the issue are having. From your description I suspect that the valve is not completely closing and allowing water to continue to flow after the icemaker indicated to the valve that it was full. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
September 29, 2014
Q:

Electrical Schematic 10654789803 Kenmore Elite Refrigerator

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
May 14, 2014
Q:

ice maker 10654789803 Kenmore Elite Refrigerator

A:

Thank you for choosing SearsPartsDirect.com. I understand how important it is to be able to diagnose the problem with your ice maker. I have included tests on the images below that you can do to determine the cause of this issue. If you are viewing this response on Sears PartsDirect and are unable to view the image, copy and paste the following web address to a seperate internet browser:
http://www.managemylife.com/mmh/questions/363154-ice-maker-10654789803-kenmore-elite-refrigerator
As per a reply to a previous similar question posted on this site: "To test the water inlet valve that is located on the back of your refrigerator where the water supply line connects you can do a couple test that are very simple. If the water is running in constantly as you describe, unplug the power supply to the refrigerator, if the water stops, you now know that the valve was being energized by the ice maker. . To verify this reapply power  if water comes through all the time ,unplug the ice maker only (will have to access behind ice maker  to get to the harness)  if the water stops when ice maker is unplugged  then the ice maker is bad. If unplugging the power supply does not stop the water flow then the inlet valve located on back of unit is bad and will need replacing."
Ensure that your water lines are not frozen, your water supply pressure is between 35 and 120 psi and that the freezer temperature is no higher than 6 degrees. Air temperature check is not accurate so place a thermometer between items in the freezer to get a correct reading.
SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services
If you have further questions please let me know. Thanks for using SearsPartsDirect.com.

Read More
Lokelani -
Sears Technician
October 01, 2013

Top Parts