Model #10654263300 KENMORE Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts, Parts Not Illustrated
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

need help replacing solenoid pump on refrigerator

A:

Managemylife.com is the place to seek information about installing parts. Please provide the part number you need help with to get the best possible answer. Just click on reply to continue the thread. The link provided below may be helpful while waiting for an expert.

Read More
Anna T -
August 24, 2012
A:

Thank you for your question. Replacing a water valve is not very difficult. The information you have received is correct. I'm also attaching a picture with instructions of how the fittings on this valve work. I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
August 25, 2012
See more answers
Q:

replacing housing on side-by-side refrig model#10654263300

A:

When it comes to replacing parts on the refrigerator or any appliance can be a tough do it yourself project. I have done some research on the Manage My Life website and have located a link that you may find helpful towards your issue. While you are waiting for a detailed reply from an expert I have attached the link below. Hope this helps!

Read More
Priscilla V -
April 09, 2012
A:

Thank you for your question.

I am sorry you are having a problem with the refrigerator. I looked up the model number you submitted. According to the parts list this model has four housings. If you could please reply below with a few more details of which housing you need to replace I will be happy to assist you with replacing the part.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
April 10, 2012
See more answers
Q:

KANMORE FREEZER 106.54263300

A:

Manage My Life is a great website to speak directly to an expert who can help you every step of the way to solving the problem you are having. An expert shall have an answer to your question within 24 to 48 hours. Have a great day.

Read More
Alina F. -
August 19, 2011
A:

Thank you for your question. I'm sorry you are having this problem with the icemaker. This icemaker has some test terminals on the module that may help determine what the problem is. To access the terminals, first remove the acceler-ice (see first picture) and then pull the front cover off of the icemaker. The terminals will be marked (see second picture) and using a well insulated jumper, place it between the L - V terminals. Be careful this is a hot (live) check. With the jumper in place, water should flow to the icemaker. If water does flow, the icemaker # 4317943 will need to be replaced. If no water flows but you can hear a humming noise, the water valve # 4389177 will need to be replaced. If nothing at all happens, some voltage checks will need to be made. A technician may be needed to make these checks. I'm listing a site you can access, to have a tech come out. Here is a link for the website: Sears Home Services . If you would like more assistance, additional details will be helpful and I will be glad to assist you further. Thank you for using Manage My Life.

Read More
Scott D -
Sears Technician
August 22, 2011
A:

Thanks for the help. What do you mean "place it between the L - V terminals?" I'm not exactly sure where to place jumper. It seems to be a hole with a screw at the end that is imbetwen the l and v terminal. Thanks again for your answer!!

Read More
Lilie -
August 22, 2011
A:

Also, what kind of jumper do you recommend?

Read More
Lilie -
August 22, 2011
A:

I'm referring to the holes next to these 2 terminals (see picture above). Use a 14 gauge wire and strip the ends back about a 1/2" (see attached picture below). I hope this will help you. If you would like more assistance, I will be glad to assist you further.

Read More
Scott D -
Sears Technician
August 23, 2011
A:

You were right, the ice maker needs to be replaced because water started flowing. I'm going to order the part today. Would you be so kind as to advice me on how to replace it? Thank you again for your help!

Read More
Lilie -
August 24, 2011
A:

I will be glad to help you. I'm attaching a picture with instructions to remove this icemaker. Just reverse the procedure to install the new one. I hope this helps you.

Read More
Scott D -
Sears Technician
August 24, 2011
A:

Wish me luck. Thank you again.

Read More
Lilie -
August 24, 2011
A:

WE HAVE ICE!!!!!!!!! WHOOHOO. Thank you so very much Scott for all of your help.

Read More
Lilie -
August 30, 2011
See more answers

Top Parts