Model #10654234400 KENMORE Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts, Optional Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Ice Maker on my Kenmore stopped working

A:

It is very convenient to have ice made in your refrigerator. So I understand your concern. I researched your question and was able to find a link with good advice from an expert on this type of issue. I attached the link below. I hope this helps.

Read More
Jackie S -
January 27, 2012
A:

Thank you for your question. I know it can be disappointing when the icemaker stops working. This icemaker has some test terminals on the module that may help determine what the problem is. To access the terminals, pull the front cover off of the icemaker. The terminals will be marked (see picture) and using a well insulated jumper, place it between the L - V terminals. Be careful this is a hot (live) check. With the jumper in place, water should flow to the icemaker. If water does flow, the icemaker # 4317943 will need to be replaced. If no water flows but you can hear a humming noise, the water valve # W10408179 will need to be replaced. These parts are available at SearsPartsDirect . If nothing at all happens, some voltage checks will need to be made. A technician may be needed to make these checks. I'm listing a site you can access, to have a tech come out. Here is a link for the website: Sears Home Services . If you would like more assistance, reply to this thread and I will be glad to assist you further. Thank you for using Manage My Life.

Read More
Scott D -
Sears Technician
January 30, 2012
See more answers

Top Parts