Model #10654209300 KENMORE Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts, Parts Not Illustrated
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

What is the cubic feet of this model. I have checked the manual and the labels inside of the fridge, but am unable to locate the cubic feet. 10654209300 Kenmore Refrigerator

Q:

Ice Maker Issue x 2 separate symptoms - what's my next step? 10654209300 Kenmore Refrigerator

A:

Never mind. Replaced the entire unit and am currently making ice!

Read More
JAMES -
January 10, 2015
A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your refrigerator. Upon researching model 10654209300; the icemaker could have failed. There is a motor on the icemaker. The motor controls the different cycles of the icemaker. It activates the mold heater to heat the ice, and then it engages the ice flipper arms. This motor also signals the water valve to release water. The motor could have failed after the ice was produced. That would affect the ice from dropping and filling with water. It’s best to replace the complete icemaker  instead of just the motor.

Thank you for choosing Sears. We appreciate your business. Have a great day.    

Read More
Jeff Wallace Jr -
Sears Technician
January 11, 2015
See more answers
Q:

Kenmore elite refrigerator 10654209300 Kenmore Refrigerator

A:

Thanks for contacting us about your refrigerator model 106.54209300; sorry you are having a problem. Based on your information and the technicians findings of the overload being bad it appears that the compressor has failed.  The clicking you now hear is the overload being overloaded because the compressor is most likely locked. After a few seconds of trying to bring on the compressor the over load will open because it is doing its job, (clicking) stopping voltage to compressor so it will not get extremely hot and cause other damage.  The solution would be to have the compressor replaced by a Certified Refrigeration Technician. Here is a link to Sears Home Services.  Ron H.  

Read More
Ron H -
Sears Technician
November 12, 2013

Top Parts