Model #10654202300 KENMORE Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts, Parts Not Illustrated
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Ice maker water was frozen this the 2ed time water supplier now will not work 10654202300 Kenmore Refrigerator

A:

We have this kenmore refrigerator the water supply, Cup and this is the second time it froze and water pouring out, defrosted the ice but the icemaker now will not work. Last time I did this the ice maker worked. How can I fix it or do I need a new ice make, asked a question never got a email and hopefully you can help

Read More
Reed -
May 29, 2014
A:

You could have a bad ice maker assembly. A failure in the level sensing boards or the water valve could also prevent the ice maker from working. 

To accurately diagnose and repair that ice maker system, you will need to perform some advanced technical tests as described in this previous answer: How do I get my icemaker to work? There is no ice/water in the system anywhere. That thread is 6 pages long and has details of failures that we discovered and corrected. Some of the images may be too small to read. Let me know if you intend to diagnose and repair this problem yourself and you need to see the images. I can re-post larger images.

Failure to properly diagnose the ice making system can result in replacing parts that may be working properly. 

The testing and diagnosis of this ice maker system if fairly advanced. If you are not confident that you can safely test and repair this ice maker system yourself, then you can schedule service.

I hope that this information helps. If you need further assistance, let us know.

 

Thanks for choosing Sears PartsDirect.

Read More
Lyle W -
Sears Technician
May 30, 2014
See more answers
Q:

icemaker 10654202300 Kenmore Refrigerator

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Julio -
July 13, 2013
A:

Thanks for contacting manage my life about your refrigerator model 10654202300, sorry you are having a problem I will be glad to assist you. Based on your description of the water running too long and overflowing the ice mold, I think the issue is in the water inlet valve. The ice maker should be full after about 4.5 oz. of water and the valve is slow to shut down the flow overfill will result. Here is a link to a new Water Valve. I hope this helps, if you need more assistance reply with details and I will be happy to respond.   If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services. Ron H.

Read More
Ron H -
Sears Technician
July 15, 2013
A:

Hello Ron H, I thank you for your help. I ordered and installed the new water inlet valve. It was easy to install, however it did not resolve the overflow problem. The icemaker still overflows for 2-3 seconds. I am considering ordering a new complete icemaker assembly. Do you think that would be the next reasonable part to replace? Or is there a controlling device that determines how long the water valve stays energized? Thanks again for your assistance

Read More
Ray -
July 21, 2013
A:

the water valve is controlled by the control module in the ice maker. there is a setting screw for how long the water valve is charged to fill the ice maker. If you go to you tube there is a few very good videos of how to do some tests for the ice maker and adjusting the control module for the water valve. all you need is a multi-meter, a small flat screwdriver and watch the videos they are very easy to follow for the testing and adjusting the ice maker.

Read More
TC -
July 21, 2013
A:

Hi Ray, if the water is actually overflowing the mold and not splaching out the fill cup then here is and image to help adjust the water flow time. Ron H.

Read More
Ron H -
Sears Technician
July 22, 2013
See more answers
Q:

Refridgerator won't restart making ice.

A:

I understand that your ice maker will not restart and make ice. I have taken some time to research your question here on the Manage My Life website and I noticed that someone else had asked a similar question with a posted response from an expert. I attached the link below for you to view. I hope the link that I provided is helpful.

Read More
Alina F. -
February 24, 2011
A:

Thanks! I have a couple of things to look at now. I'll start with that.

Read More
Brent -
February 24, 2011
A:

I know it's frustrating when the icemaker stops working. You have received some good information but the icemaker in this model, will be different. Now, in only 1 hour, the icemaker may not have had enough time yet to cycle. If it does cycle but won't fill, I suspect the problem could be a stopped up valve. When the water supply is turned off and then back on, sometimes the gush of water will break some debris loose inside the water line. This debris can then get trapped in the valve and not allow any water through.

A good check will be to, reverse the wire connections on the water valve. First disconnect power to the unit. Now, pull the unit out far enough to remove the back panel cover. With the cover off, you will see the valve and wire connections on the valve. You can now reverse the wire connections, on the valve solenoids. With the wire connections reversed, now reconnect power to the unit. Activate the dispenser lever and if no water flows to the icemaker but you can hear a humming sound, the water valve # 4389178 will need to be replaced. If water does flow to the icemaker now, the icemaker # 2212352 will need to be replaced. These parts are available at SearsPartsDirect . I hope this will help you. If you would like more assistance, any additional details will be helpful and I will be glad to assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
February 25, 2011
See more answers

Top Parts