Model #10653642300 KENMORE Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts, Parts Not Illustrated
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Loose refrigerator handle

A:

I understand that you want to tighten your refrigerator door handle. I have taken some time to research your question and noticed that someone else had asked a similar question with a posted response from an expert. I attached the link below for you to view. I hope the link that I have provided you is useful! http://www.managemylife.com/mmh/questions/110117-tighten-loose-handle-refrigerator

Read More
Alina F. -
October 28, 2010
A:

It can understand your concern to get the door handle back in place. The handle on this model slides up to remove it (see attached picture). With the handle off, check the clip (# 5 in picture) to see if it's loose. If it is, tighten the screws holding it in place. If the screws won't tighten, the handle (handle color needed) will need to be replaced. If the handle is just loose on the door, most of the time by pressing the clips inward slightly, will make the handle fit tight again. If this does not work or if you don't feel comfortable doing this, then I recommend replacing the clips # 2255411. I hope this will help you. If you would like more assistance, additional details will be helpful. Thank you for using Manage My Life.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
October 29, 2010
A:

Thank you oh soo very much! Once I realized hte handle slid up to get it off, it was a peice of cake!!! So happy to have it fixed! Thank you thank you!

Read More
jbahl123 -
October 29, 2010
A:

got it. It seems the star nuts on the back of the handle were loose so my grandson and I used a flash light and were able to pry back the clips and it finally came loose. After tightening the star nuts I now have the handle back in place and tight. Thanks for all of your help

Read More
richard -
December 05, 2011
A:

Thank you for using Manage My Life

Read More
Scott D -
Sears Technician
December 06, 2011
A:

Does this percedure work with the 10653642300 door handles?

Read More
Randall -
December 31, 2012
A:

Randall, this model shows to have the same type of handle, so the procedure will be the same. I hope this helps you.

Read More
Scott D -
Sears Technician
January 02, 2013
A:

Will this procedure also work with model 106.53632300? The top portion of the handle is loose and I can't see how it could be fixed without removing the inner gasket and shelf unit.

Read More
Thomas -
April 11, 2013
A:

Thomas, yes this model has the same type handle. The procedure will be the same.

Read More
Scott D -
Sears Technician
April 12, 2013
A:

Thanks! A size 1/8 Allen wrench / hex key on the star nuts did the trick!

Read More
Pamela -
November 16, 2015
See more answers
Q:

Icemaker not working - sensor is working properly, water comes out door dispenser, tried warming black tube, made sure temp 10-0C- what else can I try? 10653642300 Kenmore Refrigerator

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your refrigerator. Upon researching model 10653642300; there is a shut off switch next to the sensor. The shut off switch could have failed in the off position. You could test for continuity to see if it works. One of the sensors could have failed.

Thank you for choosing Sears. We appreciate your business. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
January 07, 2015
Q:

Ice Maker Kenmore 106.53642300

A:

When the ice maker is not working properly in the Kenmore refrigerator, you will find there can be many causes, just click on the link provided below. An expert will respond with additional information on your specific model withing two business day, usually sooner. If you decide on service, that link is also provided.

Read More
Anna T -
February 10, 2013
A:

Hi,

Thank you for your question. It is concerning when your appliance is not functioning correctly.

No, the test is assuming your icemaker is not in the harvest mode.  If the icemaker is in the harvest mode you will get different reading.  If the icemaker is not in the harvest mode the board can be checked for voltage in and out of the board on the right side wall. With the door switch in the closed position the black on the receiver board to the white on the receiver board will have 120 volts AC.  The black and white wire to the white wire will also have 120 volts AC.  This wire goes to the icemaker. 

To check the icemaker you will need to remover the 3 bolts holding the icemaker to the bracket and turn it around so the module cover can be removed.  This will expose some test points and using a jumper as illustrated in the photo you can test the icemaker. 

  Note:  You should only conduct those live voltage checks if you are completely confident in your technical ability to safely measure that live voltage. Wear electrical safety gloves and safety goggles when performing those checks. Unplug the refrigerator as soon as live checks are completed.

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Bill

Read More
Bill__W -
Sears Technician
February 11, 2013
A:

My icemaker is not receiving water. The sensor is working properly, water comes out the dispenser in the door, I tried 'defrosting' the black tube with hair dryer until warm, made sure freezer temp is between 10 and 0- what else can I try without removing it?

Read More
LYNN VILLANO -
January 03, 2015
See more answers

Top Parts