Model #10653602201 KENMORE Side-by-Side Refrigerator

  • Cabinet
    3 Results
  • Refrigerator Liner
    3 Results
  • Refrigerator Shelf
    3 Results
  • Freezer Liner
    3 Results
  • Motor And Ice Container
    3 Results
  • Refrigerator Door
    3 Results
  • Freezer Door
    3 Results
  • Dispenser Front
    3 Results
  • Air Flow
    3 Results
  • Control
    3 Results
  • Unit
    3 Results
  • Icemaker
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Bypass Refrigerator water filter 106.53602201

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your refrigerator. Upon researching model106.53602201; I have posted an image below  of instructions for using the dispenser without a water filter.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
March 30, 2015
Q:

What is the function of the flipper in the freezer of a side by side refrigerator? 10653602201 Kenmore Refrigerator

A:

Thank you for choosing SearsPartsDirect.com. I definitely understand the frustration with(Insert problem). I will be more then happy to assist you. Looking at the information on that flipper for the Kenmore Side-by-side Model 106.53602201. That flapper looks like the main switch for the ice on/off switch. Hope this information has help you, any further questions or concerns please feel free to comment back, thanks.

Read More
Samantha A -
Sears Technician
May 21, 2014
A:

It looks like the flipper would be operated by the opening and closing of rhe freezer door. The flipper is actually broken off and I don't see a switch anywhere that it might actuate, and looking at the replacement part picture, I don't see a switch actuator. So how does it work? Is it possible that it was designed to hold the icemaker door open?

Read More
Sam -
May 21, 2014
See more answers
Q:

refrigerator/freezer

A:

I know how important it is to have a good working ice maker in the home so that you can enjoy some ice cold beverages. I am sorry for the inconvenience and I did manage to find a link that will provide you with some good information. Click here for the link. I hope this helps with your research while you wait for your expert response.

Read More
Joseph P. -
May 02, 2013
A:

Hi,

Thanks for contacting ManageMyLife. I understand how frustrating it is having trouble with your

appliance not working.

The motor is powered by the blue wire when connected to the dispenser motor, and the white wire. When you press the ice dispense button for ice the two wire will have 120 volts AC there and this is the spot to start the troubleshooting  process.  When the connector is plugged into the motor and 120 volts is present the motor should start.  If not, use a multimeter and ohm the orange wire with the blue trace to the brown wire with the white tracer.  There should be 0 ohms.   If this is Ok the issue is the motor and if not the wire from the dispenser to the switch should be checked.  The door /dispenser switch on the freezer side wall needs to be taped down for the checks. 

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Bill

Read More
Bill__W -
Sears Technician
May 04, 2013
See more answers

Top Parts