Model #10653082300 KENMORE Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts
    3 Results
  • Control Parts, Parts Not Illustrated
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kenmore Coldspot refrigerator model # 10653082300 Serial #SP2962017 .

A:

Now that summer is here we need to stay cool with lots of cold ice drink but when the ice maker not working it can be really frustrating. While you are waiting on an expert to answer your question, I found some great links in the Manage My Life website. I have attached the links below. You can also visit Sears Home Services website to set service with a Sears technician. I have attached the link below. Hope this helps!

Read More
Dezeray S -
July 12, 2011
A:

I'm sorry you are having this problem with the icemaker. You have received some good general information from Dezeray. For low ice production, first check the temperature in the freezer. If it gets above 5 degrees, the icemaker will work slow. To check the temperature, place a thermometer between some packages. Air temperature is not a good check. If it's to warm, usually adjusting the control to a colder setting, will correct this. If the temperature is ok (between 0 & 5 degrees), it would then indicate the thermostat inside the icemaker is not working properly. In this case, I recommend replacing the icemaker # 4317943. It's available at SearsPartsDirect . I hope this will help you. If you would like more assistance, any additional details will be helpful and I will be glad to assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
July 14, 2011
A:

At this point I am not getting any ice at all. All my food is very frozen in the freezer. Do you think I need to have the whole ice maker replaced or based on the age of this refrig should I just buy a new one and not invest any more money on this refrig and just use it as a backup?

Read More
Joanne -
July 14, 2011
A:

Usually an icemaker problem is worth repairing. I recommend first checking the temperature with a thermometer as stated above, to see if the temperature is between 0 & 5 degrees. If the temperature is ok, this icemaker has some test terminals on the module that may help determine what the problem is. To access the terminals, pull the front cover off of the icemaker. The terminals will be marked (see picture) and using a well insulated jumper, place it between the L - V terminals. Be careful this is a hot (live) check. With the jumper in place, water should flow to the icemaker. If water does flow, the icemaker # 4317943 will need to be replaced. If no water flows but you can hear a humming noise, the water valve # 4389177 will need to be replaced. If nothing at all happens, some voltage checks will need to be made. A technician may be needed to make these checks. In this case, you may want to just use it as a back up. If you would like to have a technician come out to check it, you can call 1-800-469-4663 to schedule a tech to come out. If you would like more assistance, additional details will be helpful and I will be glad to assist you further. Thank you for using Manage My Life.

Read More
Scott D -
Sears Technician
July 14, 2011
See more answers
Q:

trouble with my Kenmore side by side icemaker model # 106.53082300. after changing filter, ice is in large clumps. tray seems to overflow water into bin

A:

I'm sorry about the difficulties that you are experiencing with your ice maker. I did some research at managemylife.com and found an expert answer to a similar question that may assist you until your expert can respond. I have attached the link below. If you would like assistance from a qualified technician I have also attached a link to searshomeservices.com. I hope these links will help until your expert can respond.

Read More
James -
January 26, 2011
A:

I'm sorry you are having this problem. The information you have received is correct. Pull the front cover off of the icemaker and you will have access to the adjustment. I hope the water adjustment will help you. There is not a manual for this adjustment. If you would like more assistance, any additional details will be helpful and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
January 27, 2011
See more answers
Q:

Why is Kenmore refrigerator, model number 106.53082300, running but no blowing cold air?

A:

Core Issue: Why is Kenmore refrigerator, model number 106.53082300, running but no blowing cold air?

Resolution: I am providing you with a list of possible causes for refrigerator not to cool. Please make necessary adjustments.

Refrigerator is running but not cooling because:

  1. Vent being blocked – Air flows between the freezer and refrigerator sections to provide proper cooling via air vents. Move any food items that might block the vents.
  2. Warm air getting in – If doors are being left open, opened frequently, or if there are poor seals around the door(s). Also food stored in the door of the refrigerator often stays warmer than food in the interior.
  3. Surrounding temperature is too low or too high- Too low (below 55F): If the unit is in a cold environment such as an unheated garage, basement or outdoors, this may affect the thermostat. Too high (above 110F): If the unit is in a hot environment such as a closed garage without air conditioning, on an enclosed back porch, or in direct sunlight, this may overheat the system affecting performance.
  4. Condenser coil is dirty – When the condenser coil is dirty it causes the sealed system to overheat and therefore the refrigerator will not cool properly. The condenser coil is dirty, causing the compressor to work harder. As a result, the refrigerator is running constantly and the divider between the refrigerator and the freezer (mullion) is hot to the touch. The internal temperature is warmer than normal.
Clean the condenser coil as follows: (Use gloves)
  1. Turn unit off and unplug the cord.
  2. Remove toe grill (see picture below) from the bottom of refrigerator.
  3. Vacuum the accumulated dust from underneath the refrigerator and the back of the toe grill.
  4. If you have condenser cleaning brush, brush the coil with the brush and then vacuum again.
  5. Clean toe grill with mild soap and water and put in back in place.
  6. Plug unit back in and reset controls.
(Coil brush Part# PM14X51 can be ordered at: Sears Parts Direct )

Note: General information for resolution of problem is based on information that was submitted with question. Please contact a certified technician if problem persist. Sears Repair Department 1-800-469-4663

Read More
Maria M. - Personal Solutions Manager -
Sears Technician
July 16, 2009

Top Parts