Model #10652524100 KENMORE Side-by-Side Refrigerator

  • Cabinet
    3 Results
  • Refrigerator Liner
    3 Results
  • Freezer Liner
    3 Results
  • Motor And Ice Container
    3 Results
  • Refrigerator Door
    3 Results
  • Freezer Door
    3 Results
  • Dispenser Front
    3 Results
  • Air Flow
    3 Results
  • Control
    3 Results
  • Unit
    3 Results
  • Icemaker
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Ice maker is leaking water into bin freezing cubes together, why?

A:

The Refrigerator is one of the most important appliances in the home and by far a must need. So I am understanding your concern over the issue that is currently happening. I have researched your issue on this website and came across a few questions that is similar to yours. The expert provides further detailed information that might enlighten you.

Read More
Priscilla V -
September 28, 2011
A:

The first thing you need to check is if the icemaker is mounted and completely leveled. If the icemaker is tilted, then you will get water dripping out of the tray when the icemaker cycles & calls for water. You can adjust the level of the icemaker by adjusting the mounting bracket.

If the cubes are bridged together when produced, then you may have a bad water valve and it may need to be replaced. This could also cause water to drip out of the tray. The only other possibility would be the mold of the ice tray failing to hold water. In this case you would have to replace the complete icemaker.

If you continue having problems with the ice maker, I recommend calling a service technician to diagnose and repair the problem.

Read More
Joe G. - Personal Solutions Manager -
Sears Technician
September 29, 2011
See more answers

Top Parts