Model #10652232101 KENMORE Side-by-Side Refrigerator

  • Cabinet
    3 Results
  • Refrigerator Liner
    3 Results
  • Refrigerator Shelf
    3 Results
  • Freezer Liner
    3 Results
  • Motor And Ice Container
    3 Results
  • Refrigerator Door
    3 Results
  • Freezer Door
    3 Results
  • Dispenser Front
    3 Results
  • Air Flow
    3 Results
  • Control
    3 Results
  • Unit
    3 Results
  • Icemaker
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Replacing relay on fridge # 10652232101

A:

When working with electrical parts on your appliances it is important to be safe and have detailed instructions. While you are waiting for an expert answer, I did manage to find link that will provide you with some tips to help you with your problem. I hope my link is useful.

Read More
Joseph P. -
February 08, 2011
A:

I understand your concern and being able to replace a compressor relay is nice but it can be a little tricky. The information you have already received is good. The relay you received is for the replacement compressor. If this is the original compressor, the relay (start device) you will need is # 8201786 and the capacitor is # 2169373. Now if the wires were burnt beyond use, than yes you will need to cut the burnt sections and splice in some new wire. The parts listed above are available at SearsPartsDirect . I hope this helps you. If you would like more assistance, any additional details will be helpful and I will be glad to assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
February 10, 2011
A:

Thank you very much for your help. I think I have got it working now. We will see how it does overnight. However, I have a different problem. I was trying to clean the ice dispenser and took off the ice spout and the pedal you push to get the ice out. I am now having problems putting it back. cant seem to get my hands up there to hook it up and I am not sure where the spring goes. Do you have any suggestion of an easier way to do it or instruction. I tried to remove the front panel, but it seems to be screwed from underneath the panel. Please help. Thanks, Christopher

Read More
Christopher -
February 12, 2011
A:

I'm sorry you are having this problem. I'm attaching a picture with instructions to remove the dispenser cover. With the front panel off, you will have access to the pedal. I hope this will help you.

Read More
Scott D -
Sears Technician
February 14, 2011
A:

Sorry to bother you again, but are these instruction for my model of refrigerator? I tried to insert a screwdriver at the bottom, but when I tried to turn it I heard a ripping sound. Just like you would if you are trying to pry something that is glued together. If I go between the piece that is glued and the panel I can see that the four coners are attached by screws. Any other suggestions?

Read More
Christopher -
February 17, 2011
A:

The instructions you have received will include this model. I'm attaching a picture of what this dispenser should look like. There are no screws to remove to get the cover off. It will pry off. It may help if you push down on the cover, while prying the bottom out. Be sure to disconnect power to the unit first. I hope this will help you.

Read More
Scott D -
Sears Technician
February 18, 2011
See more answers
Q:

Why won't this icemaker shut off?

A:

The mechanism inside the icemaker module or the switch contact must be damaged. The module will need to be replaced but I recommend replacing the complete icemaker # 4317943 instead. It’s the same icemaker, which makes it simple to replace. Replacing the module would be much more complicated and the cost is not much different. This icemaker is available at Sears PartsDirect .

Read More
Scott D -
Sears Technician
August 05, 2009
Q:

How do you replace the water tube in the freezer door?

A:


The type of door on your refrigerator is referred to as an FIP door. This means that the door is foam injected from the factory (foamed in place) and does not come apart. The water line comes out at the bottom of the door and is not listed as a serviceable part. This would require replacing the freezer door. I have heard of some technicians having success breaking the line loose from the foam and replacing it with a smaller diameter water line. However this is not a recommended practice due to potential water damage if the line connections leak.

Read More
expert -
Sears Technician
March 02, 2008

Top Parts