Model #10652012104 KENMORE Side-by-Side Refrigerator

  • Cabinet
    3 Results
  • Refrigerator Liner
    3 Results
  • Refrigerator Shelf
    3 Results
  • Freezer Liner
    3 Results
  • Motor And Ice Container
    3 Results
  • Refrigerator Door
    3 Results
  • Freezer Door
    3 Results
  • Dispenser Front
    3 Results
  • Air Flow
    3 Results
  • Control
    3 Results
  • Unit
    3 Results
  • Icemaker
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kenmore fridge size and value

A:

I know how important it is to have as much useful information about your refrigerator as possible. I have done some research and have came across a link that you may find helpful towards your question. While you are waiting for a detailed reply from an expert I have provided the link below. Hope this helps!

Read More
Priscilla V -
January 28, 2013
A:

Thank you for your question. It's nice to know the size of your fridge. This is a 20 cubic foot model. The value would be very difficult to say without actually seeing the unit. The price can vary in different areas. I would recommend checking some prices at some local used appliance stores and also maybe some local garage sales, to get an idea of what the value would be. I hope this will help you.

Read More
Scott D -
Sears Technician
January 29, 2013
See more answers
Q:

What will cause my ice machine not to work?

A:

The 3 main reasons for an icemaker to stop working are:

  1. Freezer temperature
  2. The icemaker
  3. The water valve
If the temperature gets too warm (10 degrees), the icemaker won't cycle. The best way to check the temperature is, to place a thermometer between some packages. Air temperature is not a good check. If the temperature is too warm, turn the controls to a colder setting.

The icemaker and water valve can both be checked at the icemaker. Pull the front cover off of the icemaker and you will see some marked terminals, on the module (see picture). Now place a well insulated jumper between the L - V terminals. Be careful this is a hot (live) check. With the jumper in place, water should now flow to the icemaker. If water does flow, the icemaker # 4317943 will need to be replaced. If no water flows but you can hear a humming noise, the water valve # 2188542 will need to be replaced. If nothing at all happens, some voltage checks will need to be made. A technician may be needed to make these checks. I'm listing a site you can check to have a tech come out. Here is a link for the website: Sears Home Services . If you need more assistance, please resubmit your question, with additional details.

Safety Notice: Be sure to disconnect the appliance before performing any troubleshooting procedures. If you are not comfortable with doing any voltage checks or repairs that might be recommended, please contact a local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Scott D -
Sears Technician
March 22, 2010
Q:

How do I adjust the ice maker?

A:

There is an adjustment knob located on the side of the housing. I'm sending you a picture with instructions. The ideal fill time for this is 7.5 seconds with a 4.5 ounce fill. If you need more assistance you can resubmit your question with more details.

Read More
Scott D -
Sears Technician

Top Parts