Model #10651524100 KENMORE Side-by-Side Refrigerator

  • Cabinet
    3 Results
  • Refrigerator Liner
    3 Results
  • Freezer Liner
    3 Results
  • Motor And Ice Container
    3 Results
  • Refrigerator Door
    3 Results
  • Freezer Door
    3 Results
  • Dispenser Front
    3 Results
  • Air Flow
    3 Results
  • Control
    3 Results
  • Unit
    3 Results
  • Icemaker
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Replace old inlet valve

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
Alina -
November 10, 2012
A:

Thanks for your inquiry about replacing the water inlet valve. I have found a link to a previous answer for this same question here; I have a Kenmore refrigerator #10659707992. I am trying to replace a part that Sears and I are having trouble identifying. I have received a solenoid valve I hope this helps, should you need additional assistance please reply with details and I will be happy to respond. >br>
Thanks Ron H.

Read More
Ron H -
Sears Technician
November 12, 2012
A:

Thanks. I replaced the Inlet but there is still a slow leak. Leaks down the slide that fills the ice bin, freezes, and keeps the water from getting to the ice tray. Water then goes down the back of the freezer since slide is blocked. Any suggestions?

Read More
John Foster -
November 18, 2012
A:

Hello John, if the water is leaking on the inside at icemaker fill trough, I would suggest that you check the fill tube that supplies water. This tube goes through the cabinet from back into the freezer, fills the ice maker at the trough. I have seen this tube move into the trough (at back of icemaker) too far causing a splash and runs down side into bucket. The fill tube can be moved because it is a sleeve over the main tube. Try pushing it back 1/4 inch so it does not touch the front side of the trough.
I hope this helps, let me know what you find.
Thanks Ron H.

Read More
Ron H -
Sears Technician
November 19, 2012
A:

Ron, my fridge trough is one piece. Slides through back of fridge and to ice maker. Removed trough and washed. Seems like water drops freeze up on trough, not sure if this is problem now. Reduced temperature. Added some washers to back to give more space to ice washer also. I'll let know. Thanks

Read More
John Foster -
November 21, 2012
A:

Definitely slow leak from back of fridge down trough. Trough freezes and doesn't allow water to get to ice maker. Replaced inlet so could it be ice maker not communicating correctly? Otherwise all I can think of is that new inlet was bad. I'm lost now. Thanks

Read More
John Foster -
November 21, 2012
A:

Hi John; if the water is seeping into the trough constantly and not just when ice maker calls for water then yes I would say the new valve is bad. (Have you had any water supply issues to your home? Very low water pressure to the valve can cause it to leak and so can excessive pressure. Any chance mineral deposits are breaking up inside your water line and interring valve, check the screen on the new valve to debris. If there is a lot of debris you should flush the supply line until only pure water comes through it.
If the water is only dripping when the icemaker calls for water re-inspect the trough for a crack or deformed area, you may just need to replace the trough. Let me know what you find.
Ron H.

Read More
Ron H -
Sears Technician
November 23, 2012
See more answers

Top Parts