Model #10651042100 KENMORE Side-by-Side Refrigerator

  • Cabinet
    3 Results
  • Refrigerator Liner
    3 Results
  • Refrigerator Shelf
    3 Results
  • Freezer Liner
    3 Results
  • Air Flow
    3 Results
  • Motor And Ice Container
    3 Results
  • Refrigerator Door
    3 Results
  • Freezer Door
    3 Results
  • Dispenser Front
    3 Results
  • Unit
    3 Results
  • Icemaker
    3 Results
  • Control
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

how do i replace/replace the drip tray on a kenmore side by side refrigerator?

A:

The drip tray does occasionally need to be cleaned out. I found some general instructions to help and attached the link below. Hope this helps!

Read More
Barbara H. -
December 27, 2010
A:

To follow these instructions look at the parts diagram for the refrigerator. You can see a parts diagram at [www.partsdirect.com?sid=MMLxexpertxmerch]. Enter model number 106.51042100 in the search field and select the (unit) page.

You should tip the top of the cabinet back 1-2 inches and place a board on each side so the front of the cabinet is off the floor.

Remove the bolts (item 40) so that item 48 can drop down. If the condensate pan has a wire guard in front of it, you must remove it.

The condensate (drip) pan should then slide out the front of the cabinet.

Read More
Jimmy K -
Sears Technician
December 28, 2010
See more answers

Top Parts