Model #10650593003 KENMORE ELITE Side-by-Side Refrigerator

  • Cabinet
    3 Results
  • Refrigerator Liner
    3 Results
  • Refrigerator Shelf
    3 Results
  • Freezer Liner
    3 Results
  • Motor And Ice Container
    3 Results
  • Refrigerator Door
    3 Results
  • Freezer Door
    3 Results
  • Dispenser Front
    3 Results
  • Air Flow
    3 Results
  • Control
    3 Results
  • Unit
    3 Results
  • Icemaker
    3 Results
Find part by diagram >

Question and Answers

Q:

door handle is loose. how do I tighten it? 10650593003 Kenmore Elite Side-by-side refrigerator

Q:

how do I remove the drain pan 10650593003 Kenmore Elite Side-by-side refrigerator

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your refrigerator. Upon researching model 10650593003; the drain tray will come out from the front or the rear. To get it out from the front, remove the bottom grill and you will see a wire gate on the left side of the filter housing. Remove the wire gate and the drain pan will pull forward but it will be tight. You can remove the filter housing screws and move the filter housing slightly to help get the drain pan out. If it still seems too tight, it will come out from the rear. Pull the cabinet out and disconnect power to the unit. Now remove the back cover panel and you will see the condenser motor and the drain pan behind it. Remove the condenser motor and the drain pan will come out.

I trust this information will help you, we appreciate your business thank for choosing Sears.

 

Read More
CarlosZ -
Sears Technician
August 17, 2015
A:

Thanks a lot for nothing! I chatted with the parts department and they were helpful. They explained how to remove the filter first and then we could get to the drain pan. I downloaded the manual and it was as unhelpful as you were. There is no section on how to remove and clean the drip pan. I'm greatly disappointed in Sears and the ask an expert!

Read More
Cecelia Hagman -
August 17, 2015
See more answers
Q:

Is this compressor what I need to repair my refrigerator? 10650593003 Kenmore Elite Side-by-side refrigerator

A:

Thanks for the inquiry and for using SearsPartsDirect.com.

Compressors rarely fail outside of overheating and frying themselves if you had a compressor fan motor failure. If the compressor is just not turning on to generate chilled air to the freezer, chances are you need a new start device and overload for it, which just plug into the side of the compressor. If the compressor did fail, it would more than likely be more economical to replace the refrigerator rather than having it repaired due to the labor cost of removing and installing the new compressor.

If by chance the start device and overload are needed for the compressor, I have attached a blue link below that you may click on to be directed to the PartsDirect site to view and purchase the parts.

Start Device and Overload Combo for Model 10650593003

Let us know if we can be of any further assistance and thanks for using SearsPartsDirect.com.  

Read More
Jeff Wallace Sr -
Sears Technician
November 18, 2013

Top Parts