Model #10650503990 KENMORE ELITE Side-by-Side Refrigerator

  • Cabinet
    3 Results
  • Refrigerator Liner
    3 Results
  • Refrigerator Shelf
    3 Results
  • Freezer Liner
    3 Results
  • Motor And Ice Container
    3 Results
  • Refrigerator Door
    3 Results
  • Freezer Door
    3 Results
  • Dispenser Front
    3 Results
  • Air Flow
    3 Results
  • Controls
    3 Results
  • Unit
    3 Results
  • Icemaker
    3 Results
Find part by diagram >

Question and Answers

Q:

water dripping from door dispenser. 10650503990 Kenmore Elite Side by side refrigerator

Q:

How do I replace a water filter housing for a Kenmore Coldspot Model 10650503990? 10650503990

A:

Thank you for choosing SearsPartsDirect.com. I can certainly assist you in locating the instructions to replace the water filter housing on your refrigerator. I did look into the model number you have provided, and I have found information to assist you.

First you will need to remove the power from the unit.
Now you can remove the bottom grille from your refrigerator. This will give you access to the filter and filter housing. 
You will then need to remove the one screw located on the left hand side of the housing. 

After you have removed the grille and the screw, follow the instructions below to remove the water hoses. 


There is no special tool for removing the hoses on a water filter housing. The fittings the tubes fit into have a collar that can be pushed inward. To remove the water line tubing push the collet against the body of the union and pull out tubes (see figure
 
1). When reconnecting the water lines, cut off 1/2" of tubing before reinstalling.
 
Insert the tubes until they "bottom out" in the connector (approximately 1/2" of insertion for each tube). This will assure a good seal and will prevent possible damage due to water leaks.

You now can install the new housing.



You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears’s technician. Here is a link for the website: Sears Home Services.

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
July 25, 2014
Q:

fill tube on my elite is freezing i am assuming the water valve is not working properly and dripping water after filling, what part needs replace to correct 10650503990 Kenmore Elite Side by side...

A:

Thank you for choosing SearsPartsDirect.com. Thank you for your question. I can understand how upsetting this situation can be. Frozen fill tubes is never any fun. Based on your situation, it does sounds like the water valve needs to be replaced. The part number for your valve is W10408179. You can give us a call at 1800-366-7278 or you can click here to get that ordered.

If you are not comfortable making this repair yourself, I recommend a technician go out to your home. If you would like a Sears technician to complete the repair, you can set up service at www.SearsHomeServices.com or by calling 1-800-469-4663.


I hope this helps you. Have a great day.

Read More
Samantha A -
Sears Technician
May 15, 2014

Top Parts