Model #10650262993 KENMORE Side-by-Side Refrigerator

  • Cabinet
    3 Results
  • Refrigerator Liner
    3 Results
  • Refrigerator Shelf
    3 Results
  • Freezer Liner
    3 Results
  • Motor And Ice Container
    3 Results
  • Refrigerator Door
    3 Results
  • Freezer Door
    3 Results
  • Dispenser Front
    3 Results
  • Air Flow
    3 Results
  • Control
    3 Results
  • Unit
    3 Results
  • Icemaker
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How does new part work? 106.50296993

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Natasha12 -
Sears Technician
May 13, 2014
Q:

10650262993 no water past inlet valve going to ice maker

A:

Having an appliance not working properly can be quite frustrating. While you are waiting on an expert to answer your question, I researched your question in the Manage My Life website and found this great link on Ice Maker I also found your manual in case you need it. I attached the links below. Hope this helps! http://www.managemylife.com/mmh/questions/201929-why-isnt-water-going-into-my-ice-maker http://www.managemylife.com/mmh/owner_manuals/4766/KENMORE-Side-by-Side-Refrigerator-L0311310?brand_name_search=106-50262993+

Read More
Dezeray S -
November 09, 2010
A:

I'm sorry you are having this problem. This icemaker has some test terminals on the module that may help determine what the problem is. To access the terminals, pull the front cover off of the icemaker. The terminals will be marked (see picture) and using a well insulated jumper, place it between the L - V terminals. Be careful this is a hot (live) check. With the jumper in place, water should flow to the icemaker. If water does flow, the icemaker # 4317943 will need to be replaced. If no water flows but you can hear a humming noise, the water valve # 4389177 will need to be replaced. If nothing at all happens, some voltage checks will need to be made. A technician may be needed to make these checks. I'm listing a site you can access, to have a tech come out. Here is a link for the website: Sears Home Services . If you would like more assistance, additional details will be helpful. Thank you for using Manage My Life.

Read More
Scott D -
Sears Technician
November 10, 2010
See more answers
Q:

Ask your own question or join this conversation

A:

That's great that you want to change the ice maker on your own. While you wait for the expert to answer i would suggest for you to look at the link that i provided you down bellow. I hope that it helps, good luck.

Read More
celene -
September 10, 2010
A:

Unfortunately, there are no instructions to replace this icemaker. I’m attaching a picture that shows the clips to remove the acceler-ice assembly. Be sure to disconnect power to the refrigerator first. To take the icemaker out, remove the 2 screws above the icemaker mold and 1 screw under the mold. It will now be loose and you can disconnect the harness and remove the icemaker. Reverse the procedure to install the icemaker. If you would like more assistance, additional details will be needed.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
September 13, 2010
See more answers

Top Parts