Model #10645422800 KENMORE ELITE Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers

Q:

i would like to change the ice make motor in my fridge 10645422800 Kenmore Elite Side-by-side refrigerator

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Marc -
July 30, 2013
A:

Hi Marc and thank you for the quick response, just to insure i am clear with my question the unit is still making ice and filling the ice cube storage container fine, it is the parts in the freezer door that operates the auger that is not working properly, the motor still operates and turns on when i press the switch for the ice and the auger still turns as long as there is no ice in the bin but the moment you put any resistance it stops turning which tells me that something is stripped with in the motor or shaft with in the door. i need to know how i get access inside the freezer door to inspect and repair or replace. thanks again Jamey

Read More
james -
July 30, 2013
A:

Thank you for using ManageMyLife.com. The dispenser motor in this model is inside the freezer door. Underneath the bubble inside the freezer door, you will see an access cover. Remove this cover and you will see the motor. Now you can remove the screws holding the motor in place and drop it down. Reverse the procedure to reinstall it. I'm attaching some pictures with instructions to remove and replace this dispenser motor:

If you have any further questions or inquiries, please don't hesitate to ask. Thank you for using ManageMyLife.com.

 

Read More
Jeff Wallace Sr -
Sears Technician
July 30, 2013
See more answers
Q:

How to Change a light bulb in Kenmore Elite Refrigerator?

A:

Good afternoon.... I can understand your concern over removing that light bulb in a safe manner. I did locate a link that will discuss your situation in greater detail. Though this link discusses a different model number, the mechanics are likely going to be very similar. Keep in mind that an expert will be responding within the next two business days if not sooner and will likely offer you more information and instruction. I hope this link will help you and have a nice day.

Read More
Henry -
April 12, 2013
A:

Refrigerator light bulbs can be difficult to remove.  The information in the link provided by Henry is good and covers different situations.  This bulb shows as a screw in type.  Unplug the refrigerator, do use a rag to hold the bulb. This should unscrew to the left. If it won't budge, you may have to break the bulb and use needle nose pliers to get the rest out. The replacement bulb is part#W10194422. Once out, inspect the holder and connector inside.  If it is corroded, the socket should also be replaced.  It is part  #2162085.  It is a plug in type. These can be ordered at Sears Parts Direct .  If further assistance is needed, please reply.  Thank you for using Manage My Life.

Read More
Barbara H. -
Sears Technician
April 13, 2013
See more answers

Top Parts