Model #106172441 CRAFTSMAN Air compressor

  • Repair Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Broken Part 106172441 Craftsman Sears single cylinder tank type compressor

A:

Thanks for the inquiry and for being a valued member.

Unfortunately, due to the age of the compressor, it appears the valve has since been discontinued and is no longer available for purchase. The only replaceable parts currently available are more common items like hardware and gaskets. There is not a viable substitute for the valve, or it would have subbed in place of the original by the manufacturer. 

We apologize for the inconvenience and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
January 25, 2015
Q:

need compression rod for old compressor model # 106172441 not available through sears how to replace this part?

A:

When it comes to replacing parts on your tool or appliance it can be a challenge without any instructions. While you are waiting on an expert to answer your question, I suggest you verify your model number and attach it to this thread so you can get a better answer from the experts!

Read More
Dezeray -
April 24, 2012
A:

Thank you for your question.

I am sorry you are having a problem with the air compressor. I searched for the connecting rod in our system and on the internet. I did not find anyone that has the connecting rod. I do not think you will be able to locate the connecting rod because of the age of the unit.

Thank you for using Manage My Life!

Mark T.

Read More
Mark T -
Sears Technician
April 26, 2012
See more answers
Q:

torque and pattern

A:

I know how important it is to have the proper air pressure in your air compressor so that it works properly and although your appliance is leaking air I hope to be of some help. While you are waiting for an expert answer, I did manage to find a link that may provide guidance towards what may be causing the problem on your air compressor. I am also adding a second link in where you can enter your model number and a parts list diagram will pop up in where you can find a lot of great affordable parts. I hope my links are useful.

Read More
Joseph P. -
January 24, 2011
A:

Thank you for your question.

I have checked the model number you have submitted. The head bolts should be torque to 45 inch pounds in a cross pattern. Do not use any sealant on the gaskets when you are reassembling the compressor. I recommend making sure all of the old gasket is removed and the surface is completely cleaned before assembly. Doing this should prevent any leaks. Due to the age of the compressor, I recommend checking the rings and the valve plate. The flappers on the valve plate might not be sealing. The flappers on some models can be removed and cleaned with acetone. I hope this is helpful.

Here is a link to order any parts you need. Sears Parts Direct . Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 25, 2011
See more answers

Top Parts

Top Accessories