Model #106154581 CRAFTSMAN Air compressor

  • Unit
    3 Results
Find part by diagram >

Question and Answers

Q:

Torque specs for air compressor Model # 106.154581 106.154581

A:

Thanks for the inquiry and for being a valued member.

The torque specs should be:
• Connecting rod Torque 7-10 ft. lbs.
• Flapper valve screws Torque 13-17 in. lbs.
• Head bolts Torque 10-12 ft. lbs.
• Bearing Cap Bolts Torque 50-120 in. lbs.

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 



Read More
Jeff Wallace Sr -
Sears Technician
December 07, 2014
Q:

Does anyone have manuals for Sears air compressors models: 106171110, 106154581, and 919174320? Thanx

A:

I understand the concern when trying to find manual books for older products. I did some research on the three models provided. I was only able to locate one & I added the link below. An expert will reply within 48 hours. Have a nice day!

Read More
Yadira B -
December 02, 2012
A:

Thank you for your question.

I will be happy to assist you. I looked up the model numbers you submitted. I was only able to find the manual for one of the air compressors. Click here to load that manual. Once it loads, you can save a copy to your computer and/or print it out. The other two units are from the 70s and we do not have copies of the manual for those. If you are having a particular problem with them please let me know I will be happy to y to help.

Thank you for using Manage my life. Mark T

Read More
Mark T -
Sears Technician
December 03, 2012
See more answers
Q:

looking for manual sears air compressor model 106154581 or 106154681 or 106154781

A:

Manuals are great to have for any appliances or tools. While you are waiting on an expert to answer your question, I was searching your model numbers you have provided and couldn't seem to find anything on them. A suggestion I have is to look over model numbers once more and attach it to this thread so you can have the best answer from the experts! Hope this helps!

Read More
Dezeray S -
March 10, 2012
A:

Thank you for your question.

I am sorry I was not able to find the manual for you. I searched our website and the internet without any luck. I checked the parts list and it shows the manual to be no longer available.

If you are having a particular problem with the compressor please feel free to reply below with the details. I will be happy to assist you with any questions.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
March 10, 2012
A:

Thanks if I every one I'm going to figure out how to PDF it a lot of people looking for 106 manuals I just bought this old compressor it's 110 v input it on a 30 amp breaker works perfect constant air with small blower stays at about 70 to 75 pounds I think that is pretty good

Read More
Kelley pack -
March 10, 2012
A:

My psi stops at 100 that is fine but goes down to 70 before it kicks back in can I change that to about 80 or 90

Read More
Kelley pack -
March 11, 2012
A:

You might be able to adjust the kick on pressure. First, unplug the compressor and remove the cover on the pressure switch. If the switch is adjustable, the instructions should be on the underside of the cover. If the instructions are not on the underside of the cover, click on the link below. It will take you to a video that shows how to adjust the pressure. If your switch is not adjustable, you will need to order a new switch. Just remember a new switch may need some modifications to the 1/4 inch tubing.

Read More
Mark T -
Sears Technician
March 12, 2012
See more answers

Top Accessories