Model #10463 WARDS NPA Grill, Gas

  • No Parts Or Service Available
    3 Results
Find part by diagram >

Question and Answers

Q:

Re part # WB36T10648 91147812200 Kenmore Microwave/oven combo

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Kenmore microwave.

From the information you have provided above, after researching model number 911.47812200. the part number WB36T10648 does not come with the smart board. the part number for the board is WB27T10463.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

Read More
Benny23 -
Sears Technician
June 01, 2015
A:

Thanks for your quick reply. WB27T10463 appears to be the board for the microwave only. I need the board for the oven, too (which also mounts behind the WB36T10648 face plate. Do you have a number for the oven board? Thanks again!

Read More
Frank -
June 01, 2015
See more answers
Q:

can's set temp or broil or self clean temps with start button 91147812200 Kenmore Microwave/oven combo

A:

new symptom today, when pressing the start button, the number 100 shows up on the display and a yellow/orange box shows up next to it for about one tenth of a second, then just back to the clock display.

Read More
Dexter -
October 02, 2013
A:

Thank you for our question. I can see that having this new appliance not work after waiting for the remodeling to be finished would be upsetting. I have reviewed the information for this combo.  It appears the microwave and oven share a control. Because of this, I am unable to provide troubleshooting help.

Microwaves contain high-voltage components that can retain a lethal electrical charge of up to 2200 VAC -- even when the microwave is unplugged. Repairs and adjustments, even minor ones such as operating on 1/2 power, can cause microwave leakage. A microwave shielding leakage test should be performed after any microwave service. It is for these safety reasons that we are unable to guide you in microwave repairs and instead recommend scheduling service with a qualified service technician. You can schedule service online with Sears Home Services or by calling 1-800-4-MY-HOME. We thank you for your understanding in this matter and hope we can help you with other questions and repairs in the future.

Read More
Barbara H. -
Sears Technician
October 03, 2013
A:

actually they are separate... the oven control is WB27T10461 and the microwave control is WB27T10463. The do share the keypad. All components are quite accessible from the front of the oven without exposing all the scary electrical stuff...I've discharged many high voltage caps over the years...but thanks for the electronics lesson. After my last experience with sears home service, I don't think I'll be calling them...being without a fridge for over a month is not what I would consider motivation to use their services again.

Read More
Dexter -
October 04, 2013
See more answers
Q:

Compatible replacement for control pad on a Kenmore oven, model 911.49034100

A:

I did some research on the part and I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Joseph P. -
December 08, 2012
A:

That part WB36T10463 is the stainless steel color of control panel for the Kenmore oven that begins with model 911.4903 . . . Although that control panel is not the same color as WB27T10152, it should be compatible with the electronic oven control board in the console. It should mount onto the console in the same manner as the original color of control board. The information that I have available regarding this control panel indicates that it will be compatible and it should fit the oven. I searched for the information on other sites that indicates that this control board is not compatible with your oven model 911.49034100. I did not find that information through a web search. Reply with some links and I will look at the information from the other sites.

If you decide to use this stainless steel control panel on your oven, you can order it from this page: Control Panel -- Stainless for Kenmore Oven Model 911.4903 . . . . Be sure that you shut off the house circuit breakers for the oven before accessing internal components and replacing parts.

Read More
Lyle W -
Sears Technician
December 10, 2012
See more answers