Model #10370 WARDS NPA Top-Mount Refrigerator

  • No Parts Or Service Available
    3 Results
Find part by diagram >

Question and Answers

Q:

WD21X10252 is being replaced by Substitution: WD21X10370 CDW9380N00SS Ge Ge cafe - dishwasher

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when your dishwasher does not work after replacing a part.

I have attached the diagnostics mode. If that does not help then I recommend having a service technician diagnose your new board.

 
You can also visit searpartsdirect.com for parts, diagrams, and repair information.

 

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
July 12, 2015
A:
Natasha12 -
Sears Technician
July 12, 2015
A:

The problem is that the WD21X10370 which is supposedly a perfect substitute to the WD21X10252 controls a top button control layout just as you described in the attached piture. i.e 7-buttons control panel: 5l & 6l and then 4l, 3l, 2l, 1l. But the original top button control panel of the PDW9980N00SS is not like that at all. So the WD21X10370 works in the PDW9980N00SS but it is not consistent with the top button control panel of PDW9980N00SS. Where can I get WD21X10252 or What can I do to make the WD21X10370 to learn the layout of the top button control panel of the PDW9980N00SS

Read More
R -
July 12, 2015
A:

Would you have a wiring diagram for the WD21X10370 ?

Read More
R -
July 13, 2015
See more answers
Q:

oil change 265JU Mtd Engine (zong)

A:

Thanks for the inquiry and for being a valued member. 

The drain plug will look like a standard hex head bolt. It will be near the base of the engine block. If you google part number 951-10370 and click images, there are a few pictures of it online. I am not sure of the specific size of the bolt, but I would have a few various sized sockets handy. It will more than likely be a metric like a 13mm, but it could vary a size or two.

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
October 28, 2014
Q:

PTO Clutch problems on my Cub Cadet 1525 mower

A:

I understand getting this tool fix properly is very important. While you are waiting on an expert to answer your question, I suggest you get service with a Sears technician so they can fix this for you. I have attached the link below. Hope this helps

Read More
Dezeray S -
April 09, 2012
A:

Thank you for your question on the Cub Cadet 1525 mower.

I will need the model number from under seat of the tractor so I can look at the service information.

I believe that this model has a Kawasaki engine and it has an electric clutch. It may be that the clutch needs to be adjusted on the gap between the brake and clutch pads within the electric clutch.

Please reply with the model number so I can give you a more precise answer.

Sam A.

Read More
Sam A -
Sears Technician
April 10, 2012
A:

Hi Sam. Firstly many thanks for your help on my problem. The model # is 1525 and the Serial # is 1K222H10370. I can confirm the engine is a Kawaasaki and that it has an electric clutch. I only know the later because there is an electric cable goping into the clutch. Regards Chris.

Read More
CHRIS -
April 11, 2012
See more answers