Model #10323151 CRAFTSMAN Saw

  • Unit
    3 Results
Find part by diagram >

Question and Answers

Q:

where can I get blades for model #103.23151? It calls for part #X-1125 but says they are unavailable. 10323151 Craftsman Jig saw 18 inch

A:

Thanks for the inquiry and for being a valued member.

You are correct; the OEM blades for this saw have since been discontinued, but there are still options for blades out there. You will need to search for a 6" to 8/2", plain end blade. Sears.com has some of these blades. I have linked my search results below. 

Sears.com Results for Blades

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
November 24, 2014
Q:

How to replace blade 10323151 Craftsman Jig saw 18 inch

A:

I show that this machine takes blade part number 9-29447. The description says it's "5in to 9in long". If you stop by your nearest Sears, they should be able to match that part number up with something there or order the number for you.

The blade appears to be held in place with a little Allen screw. Look closely at the collar and you should see the little screw there and you can use an Allen wrench to loose it. You may need to take it all the way out and use a small pick to knock the broken piece out of the collar.

Thank you for using Manage My Life!

Read More
Wade_B -
Sears Technician
September 26, 2013
A:

There is an Allen set screw on both the top clamp and the bottom clamp. First, rotate the saw pulley so that the blade is at its lowest excursion. Beware that there is spring tension on the top clamp. Loosen that setscrew first, letting your thumb hold the air piston down so that things don't violently pop apart. When the screw is loose, slowly release the piston and the top part of the blade will slide out. Now loosen the bottom clamp and pull the blade free. I have yet to use a "proper" blade. I simply buy a package of standard coping saw blades, knock the pin out of one end and then break off the blade to the proper length -- and I don't remember what that is because my saw's been in storage for the last 20 years! Remember that the blade teeth must point down since the pull stroke is from under the table.

Read More
Dean -
February 06, 2014
See more answers
Q:

jig saw Model no 103.23151

A:

Owner's manuals are great to have especially when you need to trouble shoot or putting parts together. While you are waiting on an expert to answer your question, a suggestion I have is to verified your model number and attach it below so you can get a better answer from the experts! Hope this helps!

Read More
Dezeray S -
July 05, 2011
A:

Thank you for your question.

I can understand wanting to have the correct motor size and the RPM's.

You can use a standard 1/3 h.p. 1725 motor with a 2 inch drive pulley.

I hope this will help.

Thank you for using Manage My Life

Read More
Sam A -
Sears Technician
July 05, 2011
A:

The machine I have is a Sears Jig saw #10323151. SearsPartsDirect has parts list but no manuel and the motor did not come with the unit.I believe that is how it worked in the 50's.

Read More
philip -
July 05, 2011
A:

You are correct in that the motor did not come with the saw. At that time you would buy the tool and then go to the motor department and pick the size motor you needed for what ever bench top tool you purchased. You may be able to find and manual from and old wood working tool web-site. Sam A.

Read More
Sam A -
Sears Technician
July 05, 2011
See more answers