Model #10321860 CRAFTSMAN Jointer/Planer

  • Unit
    3 Results
Find part by diagram >

Question and Answers

Q:

moter 10321860 Craftsman Craftsman jointer

A:

My grandfather and father used this model, it had a 110v 5.4 amp, 1/4 hp, 1250 rpm motor....I still have it, but the motor burned out. http://i1148.photobucket.com/albums/o572/RetSquid/DSC02428_zps2c5fcb98.jpg

Read More
Pete -
September 23, 2015
A:

My grandfather and father used this model, it had a 110v 5.4 amp, 1/4 hp, 1250 rpm motor....I still have it, but the motor burned out. http://i1148.photobucket.com/albums/o572/RetSquid/DSC02428_zps2c5fcb98.jpg

Read More
Pete -
September 23, 2015
See more answers
Q:

Height Adjustment 10321860 Craftsman Craftsman jointer

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your planer and I do understand your frustration. Glad to help out. I'm looking at your model number 10321860 and here is a link an owners manual that may be very similar to yours.  I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

 

Read More
Sherman_G_Wallace -
Sears Technician
December 29, 2014
Q:

What years was this model available? 10321860 Craftsman Craftsman jointer

A:

Thank you for your question.

 

 

I will be happy to assist you. I looked up the model number you submitted. I believe this model is from the 50's. We have very limited information on this model. If you are needing parts for this model please click on the following link.

 

I hope this is helpful. Please let me know if you need further assistance.

 

Thank you for using Manage my life.

 

Mark T.

Read More
Mark T -
Sears Technician
September 23, 2013