Model #1020L GENIE Garage Door Opener

  • Head
    3 Results
  • Rail - Pcg400-pcg600
    3 Results
  • Rail - Gcg350
    3 Results
  • Rail - Pcg450l-pcg650l, Pcg500ml-pcg700ml
    3 Results
  • Rail - Gcg350l-gcg350ml, H2000, 1020l, 2020l
    3 Results
  • 9 & 12 Switch Remote Controls
    3 Results
  • Codedodger/intellicode Remote Controls
    3 Results
  • Dual Frequency & New Style Remote Controls
    3 Results
  • Keypads & Covers
    3 Results
  • Wall Controls
    3 Results
  • Photcells & Photocell Accessories
    3 Results
  • Receiver Sets
    3 Results
  • Gated Community Receiver Set & Accessories
    3 Results
  • Miscellaneous Accessories
    3 Results
  • Miscellaneous Accessories
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Garage door opener dip switch

A:

I am sorry that you are having some difficulties with your garage door opener and I will be happy to help. I did some research and I was able to find a link in where you can enter the model number of your garage door and a parts list diagram will pop up. I hope this helps, while you wait for your expert response.

Read More
Joseph P. -
July 16, 2012
A:

You will need to find the dip switches on your existing opener. They will probably be inside the wall button on your wall. The dip switches need to be set exactly the same. The new remote will come with instructions.

Read More
Don -
July 16, 2012
A:

Thanks for contacting ManageMyLife.com. I understand how frustrating it is having trouble with finding a remote to work the garage door opener. We are here to help. Your opener uses the dip switches to set the frequency code. Before you purchase a new remote, open it up and check the battery, then look at the dip switches. Next, match the switches on the remote with the wall control. The wall control has to be taken apart to locate the dip switches. Now try the remote and see if it works. If that does not work, change the switch positions and make sure they match. Also, make sure the wall control works. If the wall control does not work, you may need a new opener. A working wall control is need for the remotes to work. Therefore, if the wall control works and the current remote will not program, replace the remote. A dip switch style remote may work the opener. You need to open the wall control and find out how many switches there is. You have to purchase a remote with the same number of switches, so you can match the positions. The other option you have is a conversion kit. That has a box with 1 or 2 remotes with it. Just wire it per the instructions that come with the conversion kit. I hope this helps.

To order parts, please visit SearsPartsDirect.com with the model number.

To visit sears.com sears.com .

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Read More
John H -
Sears Technician
July 19, 2012
A:

Thanks for your reply, but this does not help me. My current remote does not have dip switches for me to copy. With no learning button and no dip switches, What can I do?

Read More
Maggie -
July 19, 2012
A:

You have the wrong remote.

Read More
Don -
July 19, 2012
A:

I have the remote pictured in the sears diagram for transmitter 139.663600. The exploded view is exactly the same as what i have.I don't see dip switches on it anywhere. Only a circuit board. I bought a universal remote from chamberlain that should work per the sears sales person based on year. I found the dip switches on the new remote- nothing like it on old one. Was hoping someone could tell me what the switch positions would be for programming without having one to compare it too. Replacement transmitter remote unavailable. What can I do?

Read More
Maggie -
July 19, 2012
A:

Have you followed the instructions given by John H. above?

Read More
Don -
July 19, 2012
A:

Maggie, You need to open the wall control up to find the switches. It is located on the circuit board. After that just match the positions and it should work. If it does not, change to switch position on the wall control and match it with the remote. You may have to try different buttons on the remote. The original has only one button and the replacement has 3.

Read More
John H -
Sears Technician
July 21, 2012
A:

I have an Aladdin Genie 1/3 Hp garage door opener model #1020L-390 How can I find out what the DIP code is. I have a CLICKER to replace the lost hand held opener. The door has been broken for 3 years and now that it is fixed I cannot find the origional remote

Read More
Marcia -
November 21, 2012
A:

Marcia, I sorry for the problem you are having. If you submit the question, one of our experts will gladly answer your question.

Read More
John H -
Sears Technician
November 26, 2012
See more answers

Top Accessories