Model #1010 HOOVER Vacuum, Upright

  • Agitator
    3 Results
  • Cleaningtools
    3 Results
  • Handle
    3 Results
  • Hose
    3 Results
  • Mainbody
    3 Results
  • Motor Assembly, Hood
    3 Results
  • Outerbag
    3 Results
Find part by diagram >

Question and Answers

Q:

Will mounting gasket 1010A fit my Kenmore Food Waste Disposer 17560542?

A:

Having to get the correct parts for an appliance is important. I recommend while you are waiting for an expert to reply is to re visit the Sears parts direct website were you can find a direct number to speak with a parts associate regarding you issue.

Read More
Priscilla V -
April 12, 2011
A:

Thanks for quick response. I did speak with an associate at Sears Part Direct who recommended me to this website. She was unable to link part 1010A to the disposer model 17560542. Sorry I didn't spell this out in my initial question.

Read More
Gary -
April 12, 2011
A:

Thank you for your question and I understand your concern.

Your correct and I would assume the model number was either misread or a number is missing, however the mounting gasket part # 1010A is a good part number and is used on many models and it will most likely fit your model. Here is a link to one model using the part number 1010A.

The models I have listed below was listed using part #1010A.

175.605540 175.60554CE 175.605560 175.605810 175.607930 175.66544 175.67541 175.69570 175.69572

Read More
Joey S -
Sears Technician
April 14, 2011
A:

Thanks, Joey. I had not seen your response until today. I'm sending along a copy of my disposer's parts list to confirm our unit's model number. Also, from what I can determine the mounting gasket, part #1010A, holds the rubberized flaps that prevent a back splash from coming up from the disposer when it is in action. I'm looking to replace them as they are worn out. Do I need other parts such as other gaskets in order to replace the mounting gasket? Thanks again for your expertise.

Read More
Gary -
April 25, 2011
A:

Gary: The mounting gasket part #1010A will fit your model disposal. This mounting gasket is also is the splash shield. Thanks for using Manage My Life

Read More
Joey S -
Sears Technician
April 26, 2011
A:

I have a Kenmore disposal. 1 horse power model 175.605560 Need to replace flange and stopper. What brand will fit? Have not gotten much help from plummers or plumbing parts stores.

Read More
betty -
July 08, 2011
A:

Betty: The Kenmore disposal model 175.605560 is manufactured by Insinkerator.

Read More
Joey S -
Sears Technician
July 09, 2011
A:

Hi Joey I have the model no 175605540 and I am trying to replace a GE unit with it that stopped working. the flange on my sink and clamp do not seem to work with the sears unit. the throat of the flange went inside of the GE throat it is larger in diameter than the one on the sears gd. Is there a universal mount that I can use? Also my sink is whie corrian and if I have to change the sink flange do they come in a flat white color. Thanks so much Gordon

Read More
Gordon -
July 28, 2011
A:

Gordon; There is no universal mount. Each manufacturer has its own mounting flange specifically designed to fit disposal. You will need to use the flange that is supplied with the new disposal. It will require removing the old and installing the new sink flange specific for the model. The disposal mounting flanges as far as I know and seen only come in chrome.

Read More
Joey S -
Sears Technician
August 01, 2011
A:

i have kenmore disposal 17560581 will a 1010 mtg gasket fit ?

Read More
joseph -
January 26, 2016
See more answers
Q:

How do I install part #6600JB1010A 79569009900

A:

Jim,

I have attached a link for a video on how this part is replaced.

Thanks
GClem 9680

Read More
Gary9465 -
Sears Technician
November 10, 2015
A:

Jim,

I have attached a link for a video on how this part is replaced.

Thanks
GClem 9680

Read More
Gary9465 -
Sears Technician
November 10, 2015
See more answers
Q:

I have a Kenmore Garbage Disposal: Model 175.605540, which needs a new "mounting gasket", part number 1010A. I need instructions/tools list to remove/replace.

A:

Replacing parts can be frustrating and be very confusing. Below I attached the link to your diagram of the whole garbage disposal while your waiting for an expert to respond. I hope this helps!

Read More
Jackie S -
April 14, 2011
A:

Replacing some parts can be a challenge. To replace the mounting gasket will require dropping the disposal down. The gasket will fit on the lip of the body container (# 15 in picture). To lower the disposal, first make sure the power is turned off. Now disconnect the drain pipe connection and the dishwasher connection if it has one connected. Twist the mounting ring in a counterclockwise direction and the disposal will be free to drop down. Be sure to support the disposal when twisting the mounting ring, so it won't fall. With the disposal lowered, you will now be able to replace the mounting gasket. The second picture contains some pictures with instructions to lower the disposal. Reverse the procedure to reinstall the disposal. I hope this will help you. If you would like more assistance, any additional details will be helpful. Thank you for using Manage My Life.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
April 15, 2011
A:

The illustrations provided are postage stamp-sized. How is one supposed to read them? They should be labeled and large enough to at least see what they are! Where did the diagrams come from (so the customer can go to the source document)? Very unhelpful! This is not the standard I expect from Sears!

Read More
JAMES -
September 05, 2015
See more answers

Top Parts