Model #1006 FRIGIDAIRE Dishwasher

  • Dishwasher Front
    3 Results
  • Dishwasher Frame And Side Panels
    3 Results
  • Dishwasher Door Assembly
    3 Results
  • Dishwasher Assembly
    3 Results
  • Dishwasher Assembly Page 2
    3 Results
  • Dishwasher Assembly Racks
    3 Results
  • Dishwasher Assembly
    3 Results
  • Door Panel Kits
    3 Results
Find part by diagram >

Troubleshooting

Question and Answers

Q:

Washer Does not power on. 796.40272900 79640272900 Kenmore Washer

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Natasha12 -
Sears Technician
December 05, 2013
A:

I have the same problem with my washer, I was wondering if you ever found out what part was causing this.

Read More
mike -
February 03, 2014
A:

We have the same issue. Was there a resolution?

Read More
Scott -
October 08, 2014
A:

have the same washer as mentioned above, washer will not power up. why no response from sear. is this a common problem. there has to be an answer. this washer is only 13 months old. 1 month out of warranty.

Read More
bruce -
November 16, 2014
A:

We have the same problem with the washer, as well as the same problem with Sears Direct providing insufficient insight to resolve the problem.

Read More
Divad -
January 20, 2015
A:

We also are having the same problem. Washer won't power up, but sometimes unplugging and replugging it will be resolved. We had a tech come out and he found the ground wires to be loose, that was about 3 weeks ago and we hadn't had any more problems until today when it started back its old tricks. I am also curious if there is a diagnostic test. I went to the website recommended by Sears above and it says we probably need a new control board, might be time to buy another washer instead.

Read More
brian -
January 22, 2015
A:

We are also having this problem. The troubleshooting section in the manual does not address this issue at all. The "expert" above doesn't either. I am going to try replacing item 450 (Washer Electronic Control Board - part number EBR62545101 - $133.24). I will report back...

Read More
andy -
February 03, 2015
A:

Same problem here, did the power reset for couple of times before but this time, from yesterday, doesn't work anymore. I checked if power switch is even sending signal to ctrl board & it did so I'm assuming that it is the control board at the back of the washer is the culprit ( Need to do more component testing).

Read More
RICO -
February 08, 2015
A:

I have the same problem. I have owned the unit for less than 2 years. Unplugged the unit for several hours and retried with no luck. This issue is really unacceptable given the price of the unit.

Read More
Magdalena -
February 17, 2015
A:

I agree with Magdalena this washer was very expensive...because we splurged when buying this it was a mothers day gift only had it for 13 months and then this happens...this part must have a flaw so it should be recalled if you ask me.

Read More
Misty -
March 26, 2015
See more answers
Q:

Part #3550EL1006B DLE2516W Lg Dryer

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dryer. Upon researching model DLE2516W:  the screws are necessary to install this part. You can use any screws to install this part if you do not have the original screws, since the manufacture of this unit does not supply screws for this part.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
July 08, 2015
A:

There are two roller items to purchase. Why would I need to by the 24 dollar ones when they have 12 dollar ones that look similar?

Read More
Buck -
November 04, 2015
See more answers
Q:

Kenmore washer 40272 has no power. Unplug and wait a few seconds then plug in and power is restored.

A:

Troubleshooting electrical problems is something for the professionals for most of us. Hopefully when the expert reviews and responds this will be an easy fix. If you do decide to have an experienced technician diagnose and repair I attached the scheduling link below.

Read More
Barbara H. -
June 03, 2011
A:

From the description you give this is an unusual problem.

Do you have the washer plugged in to an outlet or is an extension cord being used?

Do you see an error codes such as 2E?

If the washer doesn't work then an error code should be displayed. The image below show some codes you might see.

This problem will require live voltage checks and that is something only a technician should do. You can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

You can reply with any additional details or questions for further assistance.

Read More
Fred M -
Sears Technician
June 05, 2011
A:

I'd love to know if there is more guidance from the experts here, because I just had the exact same problem with my Kenmore washer 40272. No power no activity for a while. Unplug and plug back in later and the washer eventually came back and works fine. Not necessarily the first time though after unplugging/plugging. Will be calling Sears tomorrow to schedule a repair - hope they don't give me any trouble since the washer is working at this second

Read More
Harry -
March 04, 2012
A:

I ended up plugging mine into a power strip. When I wasn't using it I would turn the power strip off. Then turn it on when i needed to use it. One day I decided to try it without the power strip and it worked perfectly. And it still does today. If you do get a service man to look at it, could you please report back on what they found? Thank you.

Read More
Dan -
March 04, 2012
A:

Spoke with Sears today...very helpful...apparently there was a recall on the Power Control Board for this particular unit. So, I have a scheduled visit to repair/replace the PCB - at no cost, despite being outside warranty. Assuming that it all goes to plan, very pleased with Sears/Kenmore's response so far. Part of why I bought the unit to start.

Read More
Harry -
March 05, 2012
A:

I'm having the same problem with the washer. Have to unplug it to get it to turn on. Sears had nothing on a recall for the PCB. Maybe the technician will know something more on Monday. But I'm fully expecting to have to pay to fix it. The washer is only two years old.

Read More
anhonet -
May 05, 2012
A:

Anhonet if you can provide a model number I'll check if there was a problem with this particular control board.

Read More
Fred M -
Sears Technician
May 06, 2012
A:

model is 40272. thanks

Read More
anhonet -
May 07, 2012
A:

I hope that Fred M can steer you in the right direction. I did get the PCB replaced at no cost. Works fine now. Same model #.

Read More
Harry -
May 07, 2012
A:

Good to know things worked out for you. Unfortunately, my washer decided to work properly when the repairman was out. He was a subcontracted guy and hadn't seen this problem before. No one I talked to at Sears was familiar with this model having a problem. Scheduling was all they were interested in. Probably just talked to basic 1st level support type people. The washer has 90 days to act up again before I have to decide to eat another service call.

Read More
anhonet -
May 07, 2012
See more answers