Model #0752 SOUND DESIGN Speakers

  • No Image Available - Fidelitone
    3 Results
Find part by diagram >

Question and Answers

Q:

table lock knob for Craftsman scroll saw 137216100 Craftsman Saw

A:

Thanks for the inquiry and for being a valued member.

The table lock knob is illustrated on the parts diagram. It's broken down from key numbers 38-42 depending on what's needed. The handle plunger is key 38 (part 0751), and the tension handle is 41 (part 0752). If you need the entire assembly, you would need to order a quantity of one of parts 38-42. 

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
June 15, 2015
Q:

Ordered control board for LG Washer Model # WM2277HW--part # 6871ER1003C. I received the part; however, does not match old board-wiring does not like up.

A:

When replacing a major part on a washer I know how helpful it can be to have detailed instructions to make the project much easier. While you are waiting for your expert answer, I did manage to find a link that will provide you with some good tips to help you with your project. I hope my link is useful.

Read More
Joseph P. -
May 09, 2011
A:

I'm not sure if this pertains to your machine or not, but it was a nasty surprise to me when I found out that my LG model number had two different versions and that you could only find that out by contacting LG directly and giving them your serial number. Until then, it made no sense why the main bearing I ordered was so much smaller than the original one.

Read More
Susan -
May 10, 2011
A:

Your situation is probably similar to the one that Susan describes in the above post. The control board has been revised on this washer. Depending on your serial number, you may need a different control board. It is likely that you need part 6871ER1078T. I recommend that you reply with the serial number of your board and we will research that part more thoroughly. It may also help to have the part number off of your original control board. See if you can find that part number if possible.

Sorry for the trouble with this part. Some parts are revised by the manufacturer and the correct part can only be ordered by referring to the serial number.

Read More
Lyle W -
Sears Technician
May 11, 2011
A:

The serial number is 608KWELD1292. Thank you!

Read More
Michael -
May 12, 2011
A:

Thanks for providing that serial number. According to the parts information that I have, you will need control board part 6871ER1078T based on the date code in that serial number. I recommend that you return that original control board and order the 6871ER1078T control board. This should resolve your problem. If you need more help, reply with additional details.

Read More
Lyle W -
Sears Technician
May 12, 2011
A:

Old part#6871ER1052C vs. new part#6871ER1078T: I just want to make sure that the new part we received is the correct replacement for the old part. Also, where can I get the instructions on how to connect the new part since it has different connections than the old part?

Read More
siouxrogers@verizon.net -
March 22, 2012
A:

I recommend that you reply with the full model number and serial number of your washer. We will check directly with the manufacturer to determine whether that is the correct PCB control board.

Read More
Lyle W -
Sears Technician
March 22, 2012
A:

Old PCB# 6871ER1052C, T.2005.02.03( on the outside of the PCB cover) 3550ER1020, LK 03.04 ABS (on inside of PCB cover) washer ser#75822502011005012318, 52WD0752 ( on side of washer)

Read More
siouxrogers@verizon.net -
March 22, 2012
A:

LG TROMM model WM2277HW

Read More
siouxrogers@verizon.net -
March 22, 2012
A:

I checked directly with our parts expert from LG. There are 2 versions of that washer model WM2277HW. The version WM2277HW00 uses control part 6871ER1003C and the version WM2277HW01 uses that control part number 6871ER1078T that you have. I recommend that you check the model number on your washer for a version or revision number. It is likely that you will need the part 6871ER1003C since that 6871ER1078T does not appear to fit. I provided an image of the part 6871ER1003C below this response. That may help you determine whether it is the part that you need. If you need more assistance, reply with additional details.

Read More
Lyle W -
Sears Technician
March 23, 2012
See more answers
Q:

SVP Tablet Touch Screen Android 4.0 model number- TPC0752

A:

I can definitely understand your frustration and concern over your tablet possibly being refurbished. While you are waiting for your expert answer, I did some research on the unit. At this time, I was unable to locate information that would be helpful in regards to your question. Some of these questions that are asked will need specific research and will be answered by an expert with-in two business days but usually sooner.

Read More
Julio -
December 14, 2012
A:

Hello Tina,

I am sorry to hear about your experience and I have taken the liberty of escalating this to my supervisors and customer service. We will be contacting you via your email associated with this thread, please respond when you receive it. If you do not hear anything within the next 48 hours, reply to this thread, but do not post personal information, I will get back to you to verify.

Again, I am sorry to hear about this issue, but we will work to remedy this situation.

Jerry C

Read More
Jerry C -
Sears Technician
December 17, 2012
A:

my "NEW" ???????? tablet now turns off on its own. Says that it is not connected to internet and and is locked!!!!!!!!!! And to top it all off....I have no users manual! HELP

Read More
Tina -
December 14, 2012
See more answers